Redfield style of rings feature a dovetail machined into the ring bottom and a corresponding slot machined into the base. The ring is assembled and placed into the slot and rotated 90 degrees. Gunsmiths use a 1 inch steel bar to turn the ring into position. Do not use the scope to turn the ring into place! The torque to turn the ring into place may warp the scope body. The scope is a precision instrument which has its internalcomponents machined and aligned to a very high degree of precision.

It is advisable to leave the bottom ring half in place in the base. If you rotate it out of the base and put it back in more than once it will begin to loosen up and may not firmly hold the scope in position any longer.

If you do feel your ring is getting a little loose in the base you can apply a little dab of epoxy glue to the mating surfaces of the ring and base, reinstall the ring and then leave it alone. As long as you do not take the ring out of the base it will hold just fine

About LifeTips

Now one of the top on-line publishers in the world, LifeTips offers tips to millions of monthly visitors. Our mission mission is to make your life smarter, better, faster and wiser. Expert writers earn dough for what they know. And exclusive sponsors in each niche topic help us make-it-all happen.

Ask a Question

Not finding the advice and tips you need on this Hunting Scopes Tip Site? Request a Tip Now!

Guru Spotlight

Jennifer Mathes, Ph.D.

Ever wonder how you could make your life better and more fun? So have tens of millions of fans who have turned to LifeTips for answers over the past decade. We keep the tips, advice, books, podcasts and writing services flowing, so you can keep your life and business growing in the right direction. Upward!