Hot topics for both consumers and webmarketers on WebmasterRadio.FM
Every Wednesday, 4PM Eastern.
March 16, 2007, Newsletter Issue #55: Base Installing Basics
1
Tip of the Week
If you are using two-piece bases, there is a front and rear and they are not usually interchangeable. If you have a Ruger rifle, the bases are machined right into the receiver and you can skip down to scope mounting. A few manufacturers recommend that you torque the screws to an inch pound setting, but normally all you need do is make them tight. Be careful not to over tighten them because you can strip those teeny screws, especially if they are aluminum.
*I prefer to use blue Loctite on the threads. Use the BLUE thread locker, not the other colors. Use the red, green or (eek!) black loctite and you will probably have to drill out the screws next time. Expensive and messy!
2
About LifeTips
Now one of the top on-line publishers in the world, LifeTips offers
tips to millions of monthly visitors. Our mission mission is to make
your life smarter, better, faster and wiser. Expert writers earn dough
for what they know. And exclusive sponsors in each niche topic help us
make-it-all happen.
